R5 Series Sign Brackets

R5 Parking Sign brackets are available in two sizes:

Single Brackets for one sign in portrait orientation
Double Brackets for two signs in portrait orientation with an option for a third horizontal sign above the two portrait signs (if required)
Two brackets are required for either of the above mentioned installations
The sign post will need to be drilled to install these brackets

Options & Features

Galvanised steel brackets
Each Single Bracket includes:1x long nut and bolt for attaching through the post and 1x short nut and bolt for attaching the sign
Each Double bracket includes: 1 x long nut and bolt for attaching through the post and 2x short nut and bolts for attaching the signs
Suits our 60mm outside diameter (50NB nominal bore) pipe
Silver galvanised finish

Notes & Tips

Always have your signs installed safely and correctly, and use a qualified and professional signage installer.

As part of your workplace health and safety inspections, your sign installation fixings and products (including sign posts and associated brackets, fixings, nuts & bolts/screws etc) should be regularly checked and maintained on an ongoing basis so that they are kept in a safe working condition at all times.

R5 Parking Sign Brackets

Code: R5BRACK

Parking Sign brackets are used for installing our R5 series parking signs that are 225x450mm on our 60mm outside diameter posts. The offset design allows the signs to be installed to one side of the post away from the road.