Confined Space Stencil, a practical safety sign template.
Confined Space Stencils come with a separate oval shaped danger symbol stencil allowing the sign to be painted in the Australian Standard danger sign colors; red, black and white.
- DANGER: 275mm W x 75mm H
- CONFINED: 410mm W x 90mm H
- SPACE: 270mm W x 90mm H
- ENTRY BY PERMIT ONLY: 500mm W x 45mm H
- Artwork size is 500x500mm
- Outer stencil size is 600x600mm
Our “Danger Confined Space Entry By Permit Only” stencil offers a simple way to mark hazardous areas. The painted message measures 500x500mm. It’s large, bold and easy to read. This stencil is made from durable polypropylene. The material is strong but flexible. It bends slightly to fit uneven surfaces. You can use it on concrete, asphalt or other hard floors. It’s also easy to clean and reuse. Just spray, let it dry, then clean it for next time. If the paint fades, place the stencil down and repaint. It looks sharp every time.
Why use a stencil instead of a sign?
A stencil marks the ground directly. This avoids trip hazards caused by raised signs. Signs can also get slippery when wet. Ground paint stays put and keeps the walking surface safe. Tip – Always use a non slip line marking paint.
What is a Confined Space?
Confined spaces are high-risk areas. They may hold toxic gases, low oxygen, or limited exits. You must mark these areas clearly. Workers need to know they must not enter without a permit. A ground stencil gives a clear warning right where it’s needed.
Use this stencil to improve safety, meet regulations, and keep your site professional. It’s fast, reusable, and effective. See also Confined Space Signs.
Confined Space Stencil
Code: LM170
Confined Space Entry By Permit Only Stencils are used for professional marking of painted floor signage. Stencil painted messages are a safer option than installing an aluminium sign on the ground which could pose a slip or trip hazard.
Categories: Line Marking Stencils, Symbol Stencils
Confined Space Stencil, a practical safety sign template.
Confined Space Stencils come with a separate oval shaped danger symbol stencil allowing the sign to be painted in the Australian Standard danger sign colors; red, black and white.
- DANGER: 275mm W x 75mm H
- CONFINED: 410mm W x 90mm H
- SPACE: 270mm W x 90mm H
- ENTRY BY PERMIT ONLY: 500mm W x 45mm H
- Artwork size is 500x500mm
- Outer stencil size is 600x600mm
Our “Danger Confined Space Entry By Permit Only” stencil offers a simple way to mark hazardous areas. The painted message measures 500x500mm. It’s large, bold and easy to read. This stencil is made from durable polypropylene. The material is strong but flexible. It bends slightly to fit uneven surfaces. You can use it on concrete, asphalt or other hard floors. It’s also easy to clean and reuse. Just spray, let it dry, then clean it for next time. If the paint fades, place the stencil down and repaint. It looks sharp every time.
Why use a stencil instead of a sign?
A stencil marks the ground directly. This avoids trip hazards caused by raised signs. Signs can also get slippery when wet. Ground paint stays put and keeps the walking surface safe. Tip – Always use a non slip line marking paint.
What is a Confined Space?
Confined spaces are high-risk areas. They may hold toxic gases, low oxygen, or limited exits. You must mark these areas clearly. Workers need to know they must not enter without a permit. A ground stencil gives a clear warning right where it’s needed.
Use this stencil to improve safety, meet regulations, and keep your site professional. It’s fast, reusable, and effective. See also Confined Space Signs.
