How to install TD1 Sign Brackets

The TD1 brackets are simply placed over the post, the bolt with washer is inserted through the sign holes and tightened into the brackets thread. As the bolt is tightened the conical bolt tip is forced into the post to grab and hold the sign in place.

TD1 Brackets are sold individually, most signs will require two brackets, one at the top of the sign and one at the bottom of the sign. Some taller signs will require more than two brackets, in this case we will add the required quantity to your quote.

Options & Features

Single sided aluminium threaded ring brackets
Suits our 60mm outside diameter (50NB nominal bore) pipe
1x Galvanised M10 Hex Bolt with cone point and washer is included with each bracket
Optional anti vandal bolts and tools are available
Silver aluminium finish

Notes & Tips

Always have your signs installed safely and correctly, and use a qualified and professional signage installer.

As part of your workplace health and safety inspections, your sign installation fixings and products (including sign posts and associated brackets, fixings, nuts & bolts/screws etc) should be regularly checked and maintained on an ongoing basis so that they are kept in a safe working condition at all times.

TD1 Brackets

Code: TD1

TD1 Brackets are used for installing a single flat sign with centre holes onto our 60mm outside diameter sign posts. Optional anti vandal bolts and tools are available.